Moore's Ideal Products Tamiya Hotshot Ball Differential Pre-Order is LIVE

Moore's Ideal Products (MIP) has begun the pre-order of the Tamiya Hotshot, Super Hotshot and Bigwig Super Ball Differential.

Link to product page:  www.miponline.com/store/mip17160.html

Below text taken from MIP web site (with some corrections to the Support Products section by me):

Please note that this is a pre-order product. MIP must receive a minimum of 250 pre-orders by January 26 before production on the product is started. If the Pre-order goal is met, products will begin shipping out February 16. If the minimum amount of orders is not met by January 26, then the product will not be manufactured and we will refund the full amount back to your account.


#17160 MIP Super Ball Diff, Tamiya HotShot/ BigWig
MSRP: $115.00
MAP: Web Only, Dealer & Distributors please contact sales@miponline.com for ordering information
UPC: 691545171609

PRODUCT DESCRIPTION:
Upgrade both your front and rear axle with ease and bring your HotShot into the 21st Century without losing that old-school 1980’s feel with the MIP Super Ball Diff for the Hotshot and Bigwig! The kit includes a 2-piece, Steel outdrive, Ball Diff w/ MIP Thrust assembly and Diff Balls. Our Ball Diff is unique because ours is rebuild-able. No other Ball Diff is capable of that! Our Ball Diff is also adjustable and increases acceleration of your car and increases speed in turns! Slight modification will be needed on the gear case of your car in order to get the part to fit. Not to worry though! We include the hole saw necessary to make the hole in the case.

TARGET CUSTOMERS:
Hot Shot, Super HotShot, & BigWig (2017)

COMPETITIVE ADVANTAGES:
Kit comes with parts to upgrade both rear and front axle
Rebuild-able 
Adjustable Traction
Increased Acceleration
Less Wear and Tear
Increase in Speed in Turns

INCLUDES:
2 - MIP Confetti Stickers 
1 - MIP Inst. Sheet
1 - MIP Thread Gel Safety Sheet 
1 - MIP Lube & Thread Cup
14 - Bearing, 3/32" Chrome Steel Balls
6 - Bearing, 5/64" Chrome Steel Balls
2 - Bearing, 10 x 15 x 4mm, Flanged
2 - Bearing, 10 x 15 x 4mm, Flanged
2 - Diff Ring, Slash
1 - Diff Spring, 1/4 x 9/32"
1 - Diff Screw, Shoulder, 2-56 x .925, Assoc
2 - Bearing, 5mm x 8mm x 2.5mm
1 - MIP T-Nut Housing, .250 Bore
1 - MIP T-Nut Insert, .250 Bore
2 - MIP Outdrive Male Tamiya HotShot
2 - MIP Outdrive Female, Tamiya HotShot
2 - MIP Diff Gear, 47T 32P, Tamiya HotShot
1 - MIP Hole Saw, Tamiya Hot Shot
4 - MIP Bone, Tamiya Hot Shot

COMPATIBILITY:
All Hotshots (remakes #58391, #84265) , Super Hotshot(#58517) & Bigwig (#47330)(2017) 

SUPPORT PRODUCTS: 
#16215 - MIP Super Ball Rebuild Kit, Tamiya Blackfoot/ Monster Beetle MSRP: $15.00 UPC:691545162157
#17161 - Super Ball Diff Outdrives MSRP: $32.00 UPC:691545162157
#17162 - Super Ball Diff 47T Diff Gear MSRP: $12.00 UPC:691545162157
#99061 - HW-BEARING/ 5 x 8 x 2.5mm (2) MSRP: $5.00 UPC: 691545990613
#99108 - HW-BEARING/ 5 x 8 x 2.5mm (2) MSRP: $5.00 UPC:691545990613
#99110 - HW-Bearing, 10mmx15mmx4mm Flanged (2) MSRP: $7.50 UPC:691545991108


I do not know if this differential will fit other Tamiya models, such as the Boomerang (vintage or re-re), Hotshot II (vintage), or Super Sabre (vintage).
 
Disclaimer:  I do not work for MIP and am not affiliated with them in any way.  This posting is to simply get the message out about this product to other Tamiya Hotshot, Super Hotshot and Bigwig owners.